Engineering Insights
Practical technical content on lightweight flange selection, standards, and application engineering.
A Practical Guide to Raised Face Slip-On Flanges
Everything engineers need to know about RFSO flanges: ASME B16.5 dimensional data, application suitability, welding procedures, and material selection for plant water, cooling, and low-pressure systems.
Read article →Understanding Lightweight Flange Standards: AWWA C207, ANSI B16.1, and Industry Practice
A practical breakdown of the standards that govern lightweight steel pipe flanges, how they relate to each other, and what engineers need to know when specifying them for waterworks and industrial service.
Read article →Choosing the Right Flange for Large Diameter Piping: Series A, Series B, and Lightweight Options
When pipe size exceeds 24 inches, flange selection gets more nuanced. This guide walks through ASME B16.47 Series A and Series B alongside lightweight alternatives.
Read article →Lightweight Flanges vs. Heavy-Duty Flanges
A side-by-side comparison of AWWA C207 lightweight flanges and ASME B16.5 heavy-duty flanges covering construction, pressure ratings, weight savings, cost, and application suitability.
Read article →Lightweight Flanges vs. Traditional Flanges
Key differences in cross-section design, material grades, pressure classes, and bolt pattern compatibility between lightweight and traditional steel pipe flanges.
Read article →Future Trends in Lightweight Flanges
Emerging developments in materials, digital engineering, sustainability, smart monitoring, and growing water infrastructure demand shaping the future of lightweight flange technology.
Read article →Installation Guide for Lightweight Flanges
Step-by-step best practices for installing lightweight flanges: preparation, alignment, gasket selection, star-pattern bolt torquing, pressure testing, and quality assurance.
Read article →Materials Used in Lightweight Flanges
A detailed look at ASTM A36, A516-70, A105, and A350 LF2 steel grades used in lightweight flange manufacturing, including mechanical properties and selection criteria.
Read article →